Charcoal Grills & Smokers, Tips & Techniques

How to Use a Pellet Grill (Complete Guide)

A pellet grill feeds wood pellets from a hopper into a firepot using an auger. The pellets ignite, a fan circulates heat and smoke through the cooking chamber, and a digital controller automatically maintains the set temperature. Load the hopper, set the temperature, preheat, place food on the grates, and monitor – that's the entire process. The Nexgrill Oakford 36A does the rest.

How a Pellet Grill Works

How a pellet grill works - Nexgrill Oakford 36A

Understanding the mechanism makes the rest of this guide make sense.

  • Hopper: the container on the side of the grill that holds wood pellets. Capacity on the Oakford 36A is 20 lbs – enough for 8-12 hours of smoking at 225°F.
  • Auger: a rotating screw mechanism that feeds pellets from the hopper into the firepot at a controlled rate. The controller adjusts the auger speed to add more or fewer pellets depending on the temperature reading.
  • Firepot: a small metal pot at the base of the cooking chamber where pellets ignite. An igniter rod lights the first pellets; subsequent pellets ignite from the burning ones already in the pot.
  • Fan: circulates heat and smoke through the cooking chamber, maintains even temperature distribution, and controls airflow to the firepot.
  • Temperature probe: a sensor inside the cooking chamber that reads the ambient temperature and reports to the controller.
  • SureTemp controller (Oakford 36A): the digital brain. It takes readings from the temperature probe, compares them to the set temperature, and adjusts auger and fan speeds to maintain it. Also manages the Nex-Fi Wi-Fi connection.

The result: set-and-forget cooking. Unlike an offset smoker, there is no fire to tend, no dampers to adjust, no charcoal to add. The controller handles temperature management throughout the cook.

Before Your First Cook: Initial Setup

The Oakford 36A requires a burn-in session before the first cook to clear manufacturing residue from the cooking chamber and season the grates.

  1. Fill the hopper with wood pellets. Any flavor works for the burn-in – use whatever you have.
  2. Plug in and turn on the grill. The controller will run through a startup sequence.
  3. Set the temperature to 350°F on the SureTemp controller.
  4. Run the grill at 350°F for 45 minutes with the lid closed.
  5. After 45 minutes, increase to 450°F and run for a further 45 minutes.
  6. Turn off and allow to cool completely.

The grill is now ready for the first actual cook. You only need to do this burn-in once.

How to Use the Oakford 36A: Step by Step

Step 1: Fill the hopper

Pouring wood pellets into the Nexgrill Oakford 36A hopper
  1. Open the hopper lid.
  2. Pour wood pellets into the hopper. For a first cook, fill to at least halfway.
  3. Check that the pellets are dry and free of dust – wet pellets jam the auger, and dusty pellets cause temperature spikes.

Step 2: Start up the grill

  1. Open the grill lid before turning on – this prevents smoke backup during the startup sequence.
  2. Turn the power switch on. The controller will display the startup sequence.
  3. The igniter rod will light the pellets in the firepot – you'll see smoke begin to rise from the cooking chamber within 2-3 minutes.
  4. Close the lid once smoke is established.

Step 3: Set the temperature and preheat

  1. Set your target temperature on the SureTemp controller.
  2. Allow the grill to preheat for 10-15 minutes. The controller will overshoot slightly during preheat and then settle at the target temperature – this is normal.
  3. Wait for the temperature to stabilize before placing food on the grates. Placing food during preheat produces uneven results.

Step 4: Place food and cook

  1. Place food on the cooking grates. Thicker cuts that need more smoke penetration go on during the entire cook at low temperature. Smaller cuts can go on at higher temperatures for shorter sessions.
  2. Close the lid. The controller maintains temperature automatically.
  3. For long cooks (brisket, pork shoulder): insert a meat probe through the side vent and connect to the controller to monitor internal temperature without opening the lid.
  4. Add pellets to the hopper as needed – the Oakford 36A hopper window lets you check the level without opening the hopper. Refill before it empties completely.

Step 5: Monitor via the Nex-Fi app

Monitoring a pellet grill cook on the Nexgrill app

The Oakford 36A connects to the Nexgrill app via Wi-Fi. Once set up, you can:

  • Monitor cooking chamber temperature in real time from your phone
  • Adjust the set temperature remotely
  • Read meat probe temperature without going outside
  • Receive alerts when the target internal temperature is reached

This feature makes a pellet grill genuinely set-and-forget for long cooks. You can monitor a 12-hour brisket cook from inside the house.

Step 6: Shutdown

  1. When the cook is complete, remove the food and set the controller to the shutdown mode (or turn the temperature down to the minimum setting).
  2. The grill runs a shutdown cycle – the auger stops feeding pellets, the remaining pellets in the firepot burn off, and the fan continues to run to cool the grill down.
  3. Do not unplug the grill during the shutdown cycle – this leaves unburnt pellets in the firepot that can cause issues at the next startup.
  4. Once the shutdown cycle is complete and the temperature has dropped below 150°F, it is safe to turn off and cover the grill.

Wood Pellet Guide

Bag of Nexgrill Oakford premium wood pellets

Wood pellet flavor significantly affects the taste of smoked food. A competition blend is the best starting point – it works well across all proteins. As you gain experience, try single-wood pellets to develop your preference.

Wood pellet Flavour profile Best for
Hickory Strong, smoky Pork ribs, pulled pork, beef brisket
Apple Mild, sweet, fruity Pork shoulder, chicken, fish, vegetables
Cherry Mild, sweet, rich color Chicken, pork, duck – great color on the bark
Oak Medium, versatile Beef, lamb, most proteins – good all-rounder
Pecan Mild, nutty Poultry, pork, cheese
Mesquite Very strong, earthy Beef – use sparingly, can overpower lighter proteins
Competition blend Balanced, all-purpose Good starting point for beginners – versatile across all proteins

Use quality pellets – low-quality pellets contain more filler (often bark or non-food-grade wood) that produces more ash and inconsistent temperature. Nexgrill-branded pellets and major brands (Bear Mountain, Lumberjack, Traeger) are all reliable choices.

Getting More Smoke Flavor from a Pellet Grill

Pellet grills produce milder smoke flavor than offset smokers. If you want more smoke intensity:

  • Cook at lower temperatures – smoke production is highest at 180-225°F. Higher temperatures burn pellets more efficiently and produce less smoke.
  • Use the Smoke setting on the SureTemp controller if available – this runs the auger intermittently to produce more smoke at the cost of less temperature precision.
  • Choose stronger pellets – hickory, mesquite, and oak produce more smoke flavor than fruit woods.
  • Use a smoke tube – a stainless steel tube filled with wood pellets or chips, placed in the cooking chamber. It smolders independently of the main fire and adds extra smoke.

A pellet grill will not produce the same depth of smoke as a well-managed offset smoker – this is a fundamental difference between the two cooking methods. For many cooks, the pellet grill's level of smoke flavor is ideal; for others, an offset smoker is the right tool.

Troubleshooting Common Issues

Temperature won't reach set point

  • Check pellet level – low pellets are the most common cause.
  • Check the firepot for ash buildup – clean before the next cook.
  • In cold or windy weather, the grill may struggle to reach high temperatures. A thermal blanket helps.

Temperature fluctuating significantly

  • Check the temperature probe inside the cooking chamber – grease on the probe causes inaccurate readings. Clean with a damp cloth.
  • Check pellet quality – dusty or wet pellets cause inconsistent feed rates and temperature swings.

Grill won't ignite

  • Check the firepot – if full of ash, the igniter rod cannot reach the pellets. Clear the ash before restarting.
  • Check the pellet level – an empty hopper means no pellets reach the firepot.
  • The igniter rod has a limited lifespan – typically 3-5 years with regular use. If the grill is older and not igniting, you may need to replace the igniter.

Related Guides

Frequently Asked Questions

How do you use a pellet grill for the first time?

Run a burn-in session first: fill the hopper, set to 350°F for 45 minutes, then 450°F for 45 minutes with the lid closed. This clears manufacturing residue. Then, for your first actual cook: fill the hopper, start up with the lid open, set your temperature, preheat for 10-15 minutes until stable, and place food on the grates. The controller maintains temperature automatically.

How long do you preheat a pellet grill?

10-15 minutes. Set the target temperature, close the lid, and wait for the temperature to stabilize – the controller overshoots slightly during preheat and then settles at the target. Place food on the grates only after the temperature has stabilized.

Can you grill on a pellet grill?

Yes. Set the temperature to 400-500°F and preheat for 15 minutes. At high temperatures, the Oakford 36A produces enough heat to sear steaks, cook burgers, and grill chicken. Smoke flavor is reduced at higher temperatures – at 450-500°F the cooking is more similar to a gas grill than a smoker.

How do you get more smoke flavor from a pellet grill?

Cook at lower temperatures (180–225°F) where smoke production is highest. Use stronger pellets – hickory, oak, or mesquite. Use the Smoke setting on the controller if available. Add a smoke tube to the cooking chamber for additional smoke. A pellet grill produces milder smoke than an offset smoker – this is inherent to the cooking method.

What pellets should I use for smoking?

A competition blend is the best starting point – it works across all proteins and produces balanced smoke flavor. For pork: apple or cherry. For beef: hickory or oak. For chicken: apple, cherry, or pecan. Use quality branded pellets – cheap pellets contain filler material that produces more ash and inconsistent temperatures.